1911 Ramped Barrel

• 1911 Build 4 - Part 2 - Ramped Barrel Frame Cut
  
  Cutting the frame bridge to accept a ramped (C/P) barrel. Since I don\'t have a mill, and wanted to try this anyway, I am doing this by files and dremel. Of course ...
  Watch Now

  ---

• Quick Tip: 1911 Ramped and Unramped Barrels and Frames
  
  Gun Tech Steve Ostrem Talks about 1911 Ramped and Unramped Barrels and Frames, explaining what works together and how to find the correct pairing for ...
  Watch Now

  ---

• 1911 Ramped Barrel vs. Non-Ramped Springfield Colt 1911A1 .45 vs. 9mm
  
  Springfield 9mm Range Officer vs. Typical 1911A1 .45 ACP non-ramped.
  Watch Now

  ---

• Ramped 1911 Barrels Vs. Unramped Barrels
  
  What are Ramped and Unramped 1911 barrels? Jess Clark from the company who invented the first ramped barrels (Clark Custom Guns) explains the ...
  Watch Now

  ---

• Harp Custom 1911 Pistol; Frame Ramp Cut
  
  Machining a 1911 frame ramp cut to 31.5 degrees on a Caspian frame.
  Watch Now

  ---

• 1911 frame ramp/ barrel ramp clearance adjusting and re-throating
  
  Barrel/ frame mating Adjusting the clearance of the frame ramp and barrel ramp to aprox 1/32\", and re-throating the barrel. In this case, the barrel ramp was ...
  Watch Now

  ---

• RAMPED vs UNRAMPED BREECHFACE 1911
  
  RAMPED vs UNRAMPED BREECHFACE 1911.
  Watch Now

  ---

• 1911 Barrel fitting - Cutting and fitting the barrel feet
  
  Part 2 Cutting and fitting the lower lugs/ barrel feet on a 1911 with ramped barrel. Bar-sto barrel with Wilson/Nowlin ramp. STI Range Master, 9mm Only hand ...
  Watch Now

  ---

• 1911 TECH; barrels Beginners - Fusion Firearms
  
  For this week\'s Fusion 1911 Tech-Tip, We look at the standard barrel ramp configurations. We get folks calling in for barrels, but many don\'t seem to know what ...
  Watch Now

  ---

• 1911 Hycomp Barrel Installation
  
  In this video I wanted to show how I fitted a Schuemann Hycomp barrel to my 1911 slide. This was my first attempt and it was done mostly by hand.
  Watch Now

  ---

• Don't polish the feed ramp on your 1911
  
  Video to accompany the article from John Travis aka 1911 Tuner on leaving the feed ramp along on your 1911.
  Watch Now

  ---

• 1911 Build 4 - Part 1 - Matrix Precision Decking jig
  
  Starting my new build. Build 4 will be a .45 ACP 1911, and will feature a Clark/Para ramped barrel. Next Part will show frame cutting for a ramped barrel.
  Watch Now

  ---

• Harp Custom 1911 Gunsmith | 1911 Frame Ramp Machining on a custom pistol
  
  Machining a 1911 pistol frame ramp during a 1911 gunsmithing operation at Harp Custom Pistols.
  Watch Now

  ---

• 1911 barrel fitting explained part 1
  
  gunsmithing.
  Watch Now

  ---

• Caspian build 2 Fitting 1911 barrel
  
  An upload of an old video you tube changed the aspect ratio on . Step two in my Caspian commander build fitting a Ed Brown drop in fit barrel. This is a quick ...
  Watch Now

  ---

• 1911 barrel fitting - Reaming and polish the chamber
  
  Part 3 Reaming and polish the chamber in a Bar-sto 9mm barrel by hand. After fitting the hood the chamber needed to be reamed to final dimensions. Using a ...
  Watch Now

  ---

• 1911 Build 6 RMR - Part 4 - Barrel Fitting
  
  In this video I fit the barrel to the slide and frame.
  Watch Now

  ---

• 1911 Build - Part 6 - Fitting the Barrel
  
  How I ended up fitting the barrel and bushing to my 1911 frame. Also a brief discussion on my plans to fit the beavertail grip safety. 5\" Nowlin barrel. Pre-fit ...
  Watch Now

  ---

• Nowlin 1911 Barrels
  
  Guntech Steve Ostrem goes over the benefits and features of Nowlin 1911 barrels.
  Watch Now

  ---